MODELING AND OPTIMIZATION OF ALUMINUM MATRIX COMPOSITE MATERIALS REINFORCED WITH CERAMIC PARTICLES
DOI:
https://doi.org/10.55640/Keywords:
aluminum matrix composite, ceramic particles, modeling, optimization, mechanical propertiesAbstract
Aluminum matrix composite materials reinforced with ceramic particles have attracted significant attention due to their high strength-to-weight ratio, wear resistance, and thermal stability. This study investigates the mechanical behavior of aluminum matrix composites reinforced with ceramic particles through numerical modeling and optimization techniques. A mathematical model describing the relationship between particle volume fraction and mechanical properties was developed. Finite element modeling was applied to evaluate stress distribution and deformation behavior. The results show that increasing the ceramic particle fraction significantly improves hardness and wear resistance while maintaining acceptable ductility. Optimization analysis indicates that the optimal particle content lies between 8–12% for balanced mechanical performance. These findings provide useful insights for the design and development of advanced composite materials used in aerospace and mechanical engineering applications.
References
1.Jumaboy, T., Bobur, S., Ulugbek, N., & Otabek, N. (2021). Research Solution of the Problem of Forming a Flat Structure of Finite Width from a High-Temperature Melt. Annals of the Romanian Society for Cell Biology, 25(6), 312–317.
2.Tavbaev, J., Saparov, B., Payzieva, M., Narmanov, O., & Narmanov, U. (2021). Modeling Theory of Acquisition Mode Materials of High-Strength Flexible Structures. International Journal of Mechanical Engineering, 6(3), 43–46.
3.Tavbaev, J., Saparov, B., & Kholikulov, E. (2021). Solution of the Boundary Value Problem of a Semi-Infinite Waveguide. Galaxy International Interdisciplinary Research Journal, 9(11), 201–204.
4.Bobur, S., Murodullo, R., Husnora, S., & Sevinchoy, G. (2021). Advances in Manufacturing Technology. American Journal of Education and Learning, 3, 3.
5.Bobur, S., Murodullo, R., Husnora, S., & Sevinchoy, G. (2021). Efficiency of Manufacturing Processes Using Modern Materials for Product Development: A Review. International Journal of Education, Social Science & Humanities, Finland, 3.
6.Lutfullaeva, N., Egamberdiev, E., Ergashev, Y., Alamov, U., & Shamuratova, S. (2024). Physico-Chemical Research of the Processes of Hydration of Cements. E3S Web of Conferences, 497, 02034.
7.Saparov, B. J., Kodirov, A. U., Tavbaev, Zh. S., & Shernaev, A. N. (2021). Analytical Study of Longitudinal Tension of an Elastic-Plastic Matrix with a Rigid Elastic-Plastic Inclusion. Universum: Technical Sciences, 42–45.
8.Saparov, B., Rakhimov, M., & Sokhibov, K. (2025). Investigation of Mechanical Properties of New Composite and Nanomaterials. International Journal of Artificial Intelligence, 1(1), 830–832.
9.Saparov, B., Rakhimov, M., & Sokhibov, Kh. (2025). Mathematical Modeling of Acoustic Processes: A Numerical and Analytical Approach. International Multidisciplinary Journal of Research and Development, 1(1).
10.Bobur, S., Murodullo, R., Husnora, S., & Sevinchoy, G. (2025). New-Generation Composite Materials: Advances in Manufacturing Technology. American Journal of Education and Learning, 3(2), 571–577.
11.Tavbaeva, J., Shernaev, A., & Saparov, B. (2025). The Influence of Material Properties, Geometric Shape of the Section, and Temperature on the Stressed State of Working Bodies. Journal of Engineering Sciences and Modern Technologies, 1(1).
12.Jumaboy, T., Bobur, S., Akhliyor, E., Gulom, S., & Akbar, K. (2024). Study of Plastic Zones of Rod and Matrix. AIP Conference Proceedings, 3045(1), 040003.
13.Saparov, B., Rakhimov, M., Mamatqulova, D., & Sangirov, A. (2024). Study of the Brittle-Elastic Matrix and Deformations in the Struts. IMRAS, 7(2), 126–132.
14.Tavbaev, Zh. S., Saparov, B. J., Shamanov, G. Z., & Erkinov, A. K. (2023). Formulation of the Thermoelasticity Problem for a Rod–Inclusion and Rock–Matrix System. Science and Innovation, 2(CAFET), 1–7.
15.Tuhtasheva, M. N., Saparov, B. J., & Normurodov, S. E. (2022). Technological Regimes for Processing Antistatic, Thermally Conductive, Anti-Friction, Wear-Resistant, and Nanocomposite Polymer Materials. Universum: Technical Sciences, 26–29.
16.Tavbaeva, F. Zh., & Tavbaev, Zh. S. (2020). Methods for Strengthening and Studying the Properties of Viscoelastic Materials. Uz Academia Scientific Journal, 3.
17.Saparov, B. J., & Shernaev, A. N. (2020). Calculation of the Invariant G–Integral. Composite Materials: Scientific, Technical and Practical Journal, 3.
18.Saparov, B. J., Sheralieva, O. A., Kholikulov, E. B., & Tavbaev, Zh. S. (2020). Model of Steady-State Destruction of Cylindrical Bodies of Arbitrary Profile. BGTU.
19.Rakhimov, M. Yu., Shernaev, A. N., & Tavbaev, Zh. S. (2018). Solution of the Problem of Forming a Flat Structure of Finite Width from High-Temperature Melt. Composite Materials: Scientific, Technical and Practical Journal, 3, 79–81.
20.Saparov, B. J., & Shernaev, A. N. (2018). Study of Cracks in Brittle Inclusions and Matrices. Composite Materials: Scientific, Technical and Practical Journal, 2, 14–18.
21.Saparov, B. J. (2017). Study of Plastic Zones in an Elastic Rod in an Ideal Elastic-Plastic Matrix. Composite Materials: Scientific, Technical and Practical Journal, 3, 23–26.
22.Saparov, B. J. (2015). Transverse Stretching of a Soft Elastic-Plastic Rod Textile Material. Problems of Textiles, 3.
23.Saparov, B. J. (2013). Application of the Theory of Invariant Contour Integral in Studying the Dynamics and Strength of Hollow Textile Fibers. Problems of Textiles, 1, 82–85.
24.Abdullayev, B., Rakhimov, M., Borikhonov, B., Dustov, A., & Samadiy, M. (2024). Study of the Mutual Influence of Components in the System Potassium Sulfate–Lithium Sulfate–Water. AIP Conference Proceedings, 3184(1), 020012.
25.Abdullayev, B., Rakhimov, M., Dustov, A., Davlatov, F., & Samadiy, M. (2024). Study of the Mutual Influence of Components in the Sodium Carbonate–Lithium Chloride–Water System. AIP Conference Proceedings, 3154(1), 020012.
26.Fayzulla Norkhudjayev, Azad Mukhamedov, Sevara Djalolova, Karolina Guzashvili, Kamola Aralova, Murodullo Rakhimov (2024). Technological Features of Cementation of Low-Alloy Structural Steel. International Journal of Mechatronics and Applied Mechanics, 170–174.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.
