INTERACTIVE METHODS FOR INCREASING WEAR RESISTANCE OF CUTTING TOOL BLADES

Authors

  • Jamshid Sharipov Asia international university, Bukhara, Uzbekistan

DOI:

https://doi.org/10.55640/

Abstract

 In the scientific work, the features of the structure of the near-surface layer of high-speed steel R6M5, complex processing modified by the methods of the first ion-nitriding, ion alloying of the surface, and wear-resistant coating, its effect on the wear resistance of the tool during dry cutting of hard-to-cut chromium and its alloys are considered. Among the methods for such surface modification is a special process based on the use of high-intensity pulsed beams of charged particles. Ion-nitriding treatment was carried out on the APP-2 unit, ion-alloying treatment was carried out on the unit, the latter with low friction coating. The advantage of this device is that it coats the Nb and Hf elements on the surface of the cutting tool, heats up to 10 6 deg/s in 5 µs, causing the two elements to diffuse into the cutting tool. The last treatment on the basis of reinforced cutting tools is coated with PLATIT π311 (TiAl)N. As a result, the stability of the cutting tool has increased by 3-4 times. The study was conducted at the Navoi Machine-Building Plant and conclusions were drawn.

Downloads

Download data is not yet available.

References

1.Vereschaka AA Study of cracking mechanisms in multi-layered composite nano -structured coatings / AA Vereschaka , SN Grigoriev //Wear.378-379 43–57, (2017)

2.Vereschaka Alexey et al. Influence of the Thickness of a Nanolayer Composite Coating on Values of Residual Stress and the Nature of Coating Wear Coatings 10 (1), 10010063, 2020

3. Xu , YX et al Thermal stability and oxidation resistance of sputtered Tisingle bonds Alsingle bond Crsingle bondN hard coatings, Surface and Coatings Technology 324, 47-57, (2017)

4.Abrorov A et al , 2020 Method of thermal treatment of saw disk teeth of fiber-processing machines by laser quenching IOP Conference Series: Materials Science and Engineering 862, 032034

5.Li WZ et al Influence of Al content on the mechanical properties and thermal stability in protective and oxidation atmospheres of Zr -Cr-Al-N coatings, Surface and Coatings Technology 236 238-246, (2013)

6.Holec D. et al, Surface & Coatings Technology 206 1698–1704 (2011)

7.Tabakov VPVP Tabakov , DI Sagitov . The performance of the cutting tool with Wear-resistant coatings in conditions of constrained cutting Ulyanovsk : UlGTU , - 179 p. 2015.

8.Tabakov VP Formation of wear-resistant ion-plasma coatings of cutting tools. - M.: Mashinostroenie , - 311 p. 2008.

9.Vereshchaka AA Improving the cutting properties of carbide tools by rational choice of the composition, structure and properties of nanosized wear-resistant complexes: Dis. for the competition uch . step . cand . tech . Sciences. - M: GOU VPO MSTU " Stankin", - 254 p. 2010.

10.www.mdpi.com .

11.Khayridin Rakhmonov, Sirojiddin Fayziev, Khakimboy Rakhimov, Dilfuza Kazakova 2021 Relative speed and temperature effect investigation of the drying agent on the moisture content of cotton E3S Web Conf 264 04008

12.JC Diaz-Guillén et al. Duplex plasma treatment of AISI D2 tool steel by combining plasma nitriding (with and without white layer) and post-oxidation. Surface & Coatings technology 385 125420, (2020)

13.OV Krysina et al, Multi-layered gradient ( Zr ,Nb )N coatings deposited by the vacuum-arc method. Surface & Coatings Technology 393 125759, (2020)

14.Yamamoto K. et al. Properties of ( Ti ,Cr,Al )N coatings with high Al content deposited by new plasma enhanced arc-cathode. Surface and Coatings Technology 174 620-626, (2003)

Downloads

Published

2025-12-06

Issue

Vol. 4 No. 11 (2025): Journal of Multidisciplinary Sciences and Innovations

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain the copyright of their manuscripts, and all Open Access articles are disseminated under the terms of the Creative Commons Attribution License 4.0 (CC-BY), which licenses unrestricted use, distribution, and reproduction in any medium, provided that the original work is appropriately cited. The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations.

How to Cite

INTERACTIVE METHODS FOR INCREASING WEAR RESISTANCE OF CUTTING TOOL BLADES. (2025). Journal of Multidisciplinary Sciences and Innovations, 4(11), 465-472. https://doi.org/10.55640/